Eickhoff

3-D lifting Rings

The galvanized 3-D hoist rings of H8 chain quality developed by Eickhoff (6 versions with load capacities from 1000 to 8000 kg) meet the requirements of DIN standards 5687, 5688 and the German mining industry standard RAG 726470. Three versions of hoist rings with capacities from 1000 to 3200 kg are also certified by the BG (Deutsche Berufsgenossenschaft).

The hoist rings can be screwed into blind bores or together with additional hex nuts (minimum grade 12.8) can be used with through bores.
Each attachment point carries the load with a safety factor of 4 against breakage in all permissible load directions. It can rotate (360°) and swivel (180°) for automatic adoption to the direction of pull, preventing chain twist and possible breakage.

lift ring

1000 kg		5000 kg
S 164807 WA	M 12 X 55	S 164781 WA	M 24 X 70
S 164810 WA	M 12 X 35	S 164785 WA	M 24 X 50
S 164812 WA	M 12 X 20	S 164787 WA	M 24 X 35
S 166863 WA	M 12 X 17	S 166877 WA	M 24 X 25

2000 kg		8000 kg
S 164800 WA	M 16 X 60	S 166895 WA	M 30 X 80
S 164803 WA	M 16 X 40	S 166900 WA	M 30 X 60
S 164805 WA	M 16 X 27	S 166902 WA	M 30 X 38
S 166871 WA	M 16 X 22	S 166904 WA	M 30 X 30

3200 kg
S 164794 WA	M 20 X 65
S 164796 WA	M 20 X 45
S 164798 WA	M 20 X 30
S 166874 WA	M 20 X 25

Eickhoff Corporation • 200 Park West Drive • Pittsburgh, PA 15275
Tel: 412-788-1400 • Fax: 412-788-4100 • E-mail: info@eickhoffcorp.com